Home     Client   Products   Contact Us   Enquiry
 
 
Nyvin Cables
The British Standard states the requirements for 'Nyvin' type cables for aircraft wiring. The cables are suitable for use in circuits in which the voltage between conductors, between a conductor and a metal braid, surrounding it and between a conductor and the aircraft structure no where exceeds 600 Volts rms and in which the frequency doesn't exceed 1600c/s.

The cables are suitable for use where, in continuous service, no combination of ambient temperature and conductor current produces a stabilized conductor temperature in excess of 105oC .They are suitable for fixed wiring in aircraft at temperature down to 75oC, but are not suitable for severe flexing at temperatures below 30oC

The cables do not support combustion, but they do not comply with the requirements of British Standard G.100 in respect of fire resistance. The cables are suitable for use in areas where ester-base fluids are present.

The generic name 'Nyvin' is applicable only to cables covered by this British Standard and complying with all its requirements.
 
The standard includes the following range of cables:
» Nyvin-Cable with a copper conductor and an insulation of PVC compound and glass braid with an outer protective covering of Nylon.
» Shaped/Circular Standard/Solid Aluminium/Copper
» Nyvinmet-Simialr to the Nyvin range but with the addition of a metal braid.
» Nyvinmetsheath-Similar to the Nyvin Range but with the addition of a metal braid and a sheath comprising a polystar film tape, a nylon fibre or ribbon braid, nylon lacquered, to prevent abrasions in installations where Nyvinmet cable is in contact without a metal braid.
» Dunyvin, Trinyvin, Dunyvinal and Trinyvinal- Two or three-core cables consisting of two or three single Nylin or Nyvinal cables twisted together
 
 
 
 
Home | About Us | Client | Products | Contact Us
Copyright © 2010 All rights reserved Website Designed and Hosted by Makemydesigns.com